Serial number

Job title

Conditions of employment

1

Power Electronics Engineer

 Job responsibilities:
1. Be responsible for product hardware parameter calculation, device selection and prototype trial production;
2. Be responsible for product validation test and improvement, and prepare test report;
3. Participate in the technical review, appraisal and standard formulation of product related design.
Qualifications:
1. Master degree or above in power electronics, electrical engineering and other related majors;
2. Be proficient in the analysis and design of power supply topology and control circuit, and have a solid foundation in analog circuit;
3. Be proficient in using PCB and other drawing software, and master at least one power electronic simulation software;
4. Working experience in hardware design is preferred;
5. Have a strong sense of responsibility, good teamwork skills, communication skills, modest and down-to-earth;
6. Be able to travel.

2

Embedded R & D Engineer

Job responsibilities:
1. Engaged in embedded system application design and development;
2. Be engaged in software program component level and product level testing, and prepare test reports.
Qualifications:
At least 1 year of experience in DSP driver development and operation;
2. Proficient in programming with C / C + + and other tools;
3. Be familiar with TCP / UDP, RS485, can protocols and their applications;
4. Have product testing ability;
5. Have a strong sense of responsibility and teamwork;
6. Under the same conditions, experience in power supply and instrument development is preferred.

3

Algorithm Design Engineer

Job responsibilities:
1. Be responsible for algorithm development based on big data, including data extraction, analysis and result sorting;
2. Be responsible for the design and development of data architecture and data product development under the framework of distributed data platform;
3. Participate in the construction of big data model system and the design and development of algorithm model;
4. Be responsible for algorithm verification and test document writing.
Qualifications:
1. Master degree or above in computer, automatic control and other related majors;
2. Be familiar with data statistical models and mining algorithms, and have practical experience in modeling and big data analysis;
3. Be familiar with conventional algorithms and some optimization algorithms of signal processing;
4. Familiar with common Java class libraries and frameworks;
5. Proficient in one of the languages such as Python / shell / Perl / R;
6. Good communication, teamwork, problem solving and innovation skills;
7. Be able to travel.

4

Data modeling and analyst

Job responsibilities:
1. Be responsible for algorithm development based on big data, including data extraction, analysis and result sorting;
2. Be responsible for the design and development of data architecture and data product development under the framework of distributed data platform;
3. Participate in the construction of big data model system and the design and development of algorithm model;
4. Be responsible for algorithm verification and test document writing.
Qualifications:
1. Master degree or above in computer, automatic control and other related majors;
2. Be familiar with data statistical models and mining algorithms, and have practical experience in modeling and big data analysis;
3. Be familiar with conventional algorithms and some optimization algorithms of signal processing;
4. Familiar with common Java class libraries and frameworks;
5. Proficient in one of the languages such as Python / shell / Perl / R;
6. Good communication, teamwork, problem solving and innovation skills;
7. Be able to travel.

5

Industrial control and modeling

Job responsibilities:
1. Analyze basic data, clean data, refine data algorithm model, mine data value from massive data and explore data application;
2. Design and compile functional modules by using data analysis algorithm in combination with business scenario requirements;
3. Be responsible for the communication of data analysis related businesses on the project and participate in the project scheme design;
4. Participate in the R & D team to improve the intelligence of equipment and software.
Qualifications:
1. master degree or above, major in control, computer, mathematics and other related fields;
2. Have a solid foundation of control theory, be familiar with predictive control, feedforward and feedback control, etc.: be able to master common machine learning algorithms, and realize data regression, classification, clustering, reinforcement learning, etc;
3. At least 2 years of relevant working experience in industrial control and modeling, data analysis, data mining and so on;
4. Skillfully use MATLAB, Python and other data analysis languages, be able to extract core results from massive data, and have rich experience in data analysis, mining, cleaning and modeling;
5. Sensitive to data, with good logical thinking ability, business understanding ability, communication ability and presentation ability;
6. Self driving ability, strong thirst for knowledge and learning ability of new technology, strong communication and expression ability and good team assistance ability, and can accept short-term business trip.

6

Marketing Manager, marketing service

 Job responsibilities:
Marketing Manager: marketing, project tracking.
Marketing services: bid preparation and review, publicity and planning, network marketing management, internal affairs of the Department.
Qualifications:
1. Able to travel for a long time, male is preferred, have teamwork ability and love learning.
2. Good written expression and communication skills.
3. Steadfast and hardworking.
5. Have a long career plan.
5. Working experience in power system or coal system is preferred.

7

 Java Development Engineer

 Job responsibilities:
1. Software product demand analysis, design, development, and complete software development projects on time and with quality;
2. Design and development of background interface, data integration and debugging of foreground page and application, and complete corresponding functions;
3. Participate in project requirements review, prepare product design documents, development documents, etc.
Qualifications:
1. Major in computer and automation, full-time bachelor degree or above, working for more than 2-3 years;
2. Love software development and have a strong interest in software products and technology;
3. Deep understanding of computer data structure and algorithm design, familiar with Java or Net development, proficient in using one or more development languages (c#, Java, etc.);
4. Familiar with database theory, master Oracle and other relational databases DDL and DML;
5. Excellent ability to analyze and solve problems, and have the courage to solve problems;
6. Strong self-motivated and thirst for knowledge, strong learning and communication skills, and good team spirit.
7. Be able to travel during the preliminary design and implementation of the project.

8

C# Software Development Engineer

 Job responsibilities:
1. Responsible for the company Net software platform development and improvement;
2. Design and development of PC or embedded controller related data acquisition and communication gateway products;
3. Responsible for writing test cases and documents in the R & D process;
4. Participate in the discussion of product design and product architecture, and jointly discuss and design products.
Qualifications:
1. Full time bachelor degree or above, major in computer or automation, at least 3 years of software development experience, at least 1 or 2 years of work; Knowledge of c# and PLC is preferred;
2. Proficient in c# language and familiar with Net framework, master ASP Net MVC, web API and other development technologies;
3. Familiar with and able to use redis, message queue, zeromq, etc;
4. Proficient in multithreading development, with high logical thinking on data processing;
5. Study the existing business, and upgrade and optimize the code and framework;
6. Familiar with MES system, discrete manufacturing, industrial bus protocol, OPC, MODBUS, etc.

9

3D data processing engineer

Job responsibilities:
1. Design and develop programs to process the data collected by laser scanners and other equipment according to needs, and be responsible for the processing, optimization and development of a series of algorithms such as 3D data filtering, data estimation, data splicing, feature extraction, target recognition and meshing;
2. Responsible for 3D scene storage optimization and geometric mesh preprocessing;
3. Be responsible for graphics processing after 3D imaging, open relevant interfaces to the outside world, and be familiar with data interaction technology.
Qualifications:
1. Bachelor degree or above, major in surveying and mapping, surveying, geographic information and other related majors, with more than 3 years of working experience;
2. Familiar with c# and C + + development;
3. Familiar with the data organization structure of 3D scene, good at algorithm design;
4. Familiar with OpenGL 3D graphics programming and geometric processing;
5. Familiar with GPU (e.g. OpenCL, CUDA, glsl) programming is preferred;
6. Good communication, teamwork, problem solving and innovation skills, industry experience in computer vision algorithm is preferred.

10

Unity development engineer

Job responsibilities:
1. Programming of virtual reality project control program based on unity;
2. Compilation of virtual reality general classes and general function functions based on unity;
3. Responsible for interactive scene development, development, expansion and maintenance of unity3d related plug-ins and editors;
4. Have an understanding of basic modeling software (such as 3dsmax and Maya), master the virtual reality program development mode, and be familiar with JavaScript or c#.
Qualifications:
1. Computer related major, bachelor degree or above, working experience of more than 3 years;
2. It is required to have 2-3 years of virtual reality development experience and be familiar with virtual hardware and software knowledge;
3. Strong communication and expression skills and innovative consciousness.

11

project manager

Job responsibilities:
1. Be fully responsible for the construction management of intelligent projects, and participate in the preparation of construction organization design, quality plan, schedule, operation instructions and other project management documents;
2. Go deep into the construction site for engineering management, deal with various problems encountered in engineering construction, control construction cost, construction quality and construction progress, manage engineering safety, engineering information and engineering contract, and coordinate and deal with various engineering affairs;
3. Participate in the joint review of drawings and equipment selection;
4. Cooperate with the implementation of exploration and mapping, environmental construction and other work;
5. Be responsible for project completion acceptance and project handover, and prepare completion documents;
6. Accounting of bill of quantities of project cost and handling of project payment procedures;
7. Project after-sales maintenance management.
Qualifications:
1. College degree or above in Electromechanical, architecture, electronics and other related majors; Familiar with mechanical drawings, able to understand construction drawings, working for more than 1 year;
2. Good communication and coordination skills, familiar with daily office software, able to adapt to long-term business trips;
3. Hold class II Constructor Certificate + safety B certificate;
4. Experience in intelligent engineering construction management, experience in power plant project construction is preferred.

12

 Software implementation and operation and maintenance engineer

Job responsibilities:
1. Be responsible for the implementation, operation and maintenance of the company's relevant software products and systems, and promote the smooth progress of the project;
2. Be responsible for the collection and sorting of customer needs, system installation, deployment, upgrade and maintenance;
3. Provide on-site technical support and daily maintenance to users, provide consultation, guidance, explain relevant business or technical problems, and collect user feedback;
4. Prepare relevant implementation documents and conduct user training.
Qualifications:
1. College degree or above, major in computer, network, automation, software engineering, information management and other related majors;
2. Flexible mind, good communication and expression skills, outgoing and cheerful, with a sense of responsibility;
3. Familiar with common commands of computer Linux operating system, installation, deployment and troubleshooting of Tomcat and JDK;
4. Familiar with Oracle or MySQL database, proficient in SQL language, understand software implementation process and basic specifications of project management;
5. Experience in power industry, project management or large-scale software implementation and service experience is preferred;
6. Understand hardware communication protocols, such as OPC, MODBUS, serial port, etc., and LAN networking, management, configuration and debugging are preferred;
9. Able to travel for a relatively long time.

13

Commissioning Engineer

Job responsibilities:
1. Under the guidance of the project manager, be responsible for the commissioning, maintenance and after-sales service of the project.
2. Work according to work instructions and relevant operating procedures, and make original data records.
3. Provide technical training for the technical personnel of the project owner, and make personnel training implementation records.
4. Prepare commissioning reports and commissioning records related to the project.
5. Provide relevant technical services and make original data records according to the after-sales service management procedures.
6. Prepare fault analysis report or quality analysis report, and mark the replaced parts.
Qualifications:
1. Bachelor degree in electrical, automation and other related majors;
2. Master relevant knowledge of power electronics and be able to carry out simple electrical design;
3. Master general AutoCAD drawing software;
4. Master PLC (S7-200) programming and iFIX software configuration programming;
5. Have good communication skills and hardworking spirit, and be able to travel frequently.

14

 Automation Engineer

Job responsibilities:
1. Be responsible for algorithm development based on big data, including data extraction, analysis and result sorting;
2. Be responsible for the design and development of data architecture and data product development under the framework of distributed data platform;
3. Participate in the construction of big data model system and the design and development of algorithm model;
4. Be responsible for algorithm verification and test document writing.
Qualifications:
1. Master degree or above in computer, automatic control and other related majors;
2. Be familiar with data statistical models and mining algorithms, and have practical experience in modeling and big data analysis;
3. Be familiar with conventional algorithms and some optimization algorithms of signal processing;
4. Familiar with common Java class libraries and frameworks;
5. Proficient in one of the languages such as Python / shell / Perl / R;
6. Good communication, teamwork, problem solving and innovation skills;
7. Be able to travel.

15

 PLC Engineer

Job responsibilities:
1. Be responsible for the development and design of electronic control of automation products, and design the electrical control system according to the manufacturing process and process requirements of non-standard equipment;
2. Design selection and list making, responsible for the selection of electrical components, making procurement plan and electrical procurement list;
3. Program writing: according to the equipment action flow chart, write equipment programs, including PLC, touch screen, bus communication and other programs;
4. Data and procedure archiving, electrical and graphic data collection, sorting and archiving.
Qualifications:
1. Bachelor degree or above, major in control theory and control engineering, electrical automation or related, working for 1-3 years;
2. Be familiar with relevant national technical standards or industrial standards, specifications and procedures of the major, and have at least 3 years of experience in electrical automation design or development;
3. Master AutoCAD, EPLAN and other design tools;
4. Proficient in using at least one common PLC (AB, Siemens, Modicon) and one common configuration software (WinCC, InTouch, iFIX);
5. Familiar with OPC, MODBUS, PROFINET and other common industrial bus protocols;
6. Be able to travel during the preliminary design and implementation of the project.

16

Optical design engineer

Job responsibilities:
1. Undertake the research and development of optical system;
2. Be responsible for the scheme design and analysis of product optical system, optimize and improve the optical system of existing products, and put forward innovative design schemes for new products;
3. Build and debug the optical path, finalize the scheme of the optical system, and cooperate with the production team to complete the conversion from the design scheme to the production line process;
4. Communicate and discuss solutions with suppliers for the selection of key components, and put forward test methods that are easy to implement;
5. Develop and document technology.
Qualifications:
1. Bachelor degree or above in optics, physics, instruments, electronics and other related majors;
2. Have more than 3 years of research and development experience in optical products, and be familiar with the principle of conventional lighting and imaging optical path; Excellent master's or doctor's fresh students are also welcome;
3. Be proficient in optical system design and master optical design and analysis software;
4. Have the design experience of laser lighting light path, and can build and debug the light path independently;
5. Experience in product design related to laser induced breakdown spectroscopy (LIBS) is preferred;
6. excellent communication, expression skills and team spirit.

17

 Budget Engineer (civil engineering direction)

Job responsibilities:
1. Be responsible for cost management and control during project construction; Strictly implement national, industrial and enterprise standards, and implement the requirements of cost management and control.
2. Be responsible for organizing the preparation and review of project estimation, budget estimate, implementation budget and budget.
3. Be responsible for the review of design changes, engineering changes and dynamic cost analysis of projects under construction.
4. Organize and review the project completion settlement, prepare the completion settlement report, and adjust the project completion settlement according to the approval opinions.
5. Be responsible for reviewing the annual and monthly capital budget of each project, and reviewing the monthly project fund payment of projects under construction.
6. Collect and sort out the basic data of cost management and participate in cost analysis.
7. Participate in the due diligence of new projects or acquired projects.
8. Cooperate with the Ministry of Commerce in bidding and bid evaluation, and participate in contract negotiation; Cooperate with the completion final accounts, audit and financial audit.
Qualifications:
1. Full time bachelor degree or above.
2. Major in project cost management.
3. Professional qualification certificate of cost engineer, professional title of engineer and national registered cost engineer are preferred.
4. Be proficient in engineering cost knowledge, master the industry market situation, and skillfully apply all kinds of budget software.
5. At least 3 ~ 5 years working experience in budget and settlement, cost analysis and control and contract management.
6. Master the engineering cost management and cost control process in the field of offshore wind power, and have excellent execution ability.
7. Have good interpersonal skills, calm and down-to-earth, strong sense of responsibility and strong sense of team.
8. Strong pressure resistance.

18

Civil construction technician

Job responsibilities:
1. Be responsible for the management of the project construction site;
2. Be responsible for setting out, construction technical guidance, on-site supervision of project quality, project progress control and cost control;
3. Do a good job in safety and technical disclosure, and accurately record the construction diary on time;
4. Be responsible for the preparation of civil engineering project budget, bill of quantities, budget estimate, project base price and audit settlement.
5. Do a good job in communication with Party A and the supervisor.
Qualifications:
1. Be able to adapt to the working environment on the construction site and obey the arrangement of the company;
2. Be familiar with the construction process and construction process of civil engineering and decoration;
3. At least 2 years of construction experience in civil engineering, decoration and installation;
4. Proficient in CAD and familiar with on-site construction setting out;
5. Working experience in preparing various project budgets, bill of quantities, budget estimates, project base price, audit and settlement is preferred;
6. Good communication, coordination and language skills, strong sense of responsibility, hardworking, serious and meticulous work, and able to work overtime.